 |
|
|
| |
|
|
|
|
|
|
- (2)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (2)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
- (1)
|
|
| |
|
|
Build Your Online Product Catalogs?
Nitrogen injection must do the following 10 points to ensure safe production, normal equipment operation and service life
1. Operators must undergo good safety education.
2. Operate strictly in accordance with equipment operating procedures.
3. When operating the valve, wear protective equipment: mask, gloves, etc. to prevent frostbite.
4. The safety valve and pressure gauge are checked once a year, the anti-riot film is checked every two years, and the check records are archived.
5. When the nitrogen is discharged, people should stay away from the discharge port, otherwise they will be suffocated for a long time.
6. Hang warning signs such as "employees only" and "Danger" at obvious locations around the nitrogen tank.
7. Frozen on the nitrogen pipeline, it is strictly forbidden to hit hardly.
8. Check the nitrogen tank once a day and report any problems in time for repair.
9. Always keep the nitrogen tank clean and free of oil and grease.
10. When the equipment is not used for a long time, the gas source should be cut off.
|
| Company: |
Taizhou Huangyan Odin Mould Co.,Ltd
|
| Contact: |
Anna Zhao |
| Address: |
No.13.Kangqiang Road, North City, Huangyan, Taizhou, Zhejiang, China |
| Postcode: |
318020 |
| Tel: |
+8657681122133 |
| Fax: |
+8657681122133 |
| E-mail: |
|
|
|
Home
